Fully compatible with all Glow-worm boilers, these
handy accessories help solve pluming and condensate
issues that can be faced when installing modern
condensing boilers.
Plume Management Kit
This clever accessory exhausts plume further away from
the duct or building openings, reducing the impact of the
vapour trail.
The simple piping kit ts neatly onto the horizontal flue
and can be extended to a maximum of 6m in length, tting
easily around ledges and other obstacles to achieve the
minimum clearance levels required on installations.
Plume Deflector Kit
A useful accessory takes the hassle out of flue gas
termination by diverting plume le , right or upwards
away from problem zones such as adjacent properties or
walk ways.
Available in black or white, the Plume Deflector Kit can
be installed quickly and simply onto a horizontal flue
instead of the standard terminal end piece during or
a er installation.
Condensate Pump
To solve problems associated in locating a suitable outlet
to drain condensate from the condensing boiler, the
Glow-worm Condensate Pump collects the condensate
from the boiler and pumps it to a suitable outlet such as
a waste system.
The smallest available in the UK, the Glow-worm
Condensate Pump operates at maximum e ciency
with the reservoir pump discharging all the
condensate when the ll level is reached, rather than a
stop/start operation.
Ridge Tile Terminal
The Ridge Tile Terminal accessory is designed to make the
roof nish look neater and less obtrusive. Available in a
black enamel nish, the ridge tile accessory can be tted
to purpose designed flue outlet ridge tiles and provides a
quick and easy design solution.
Accessories:
Plume & condensate
solutions
8
To Next Page
Loading...
Need help?
General
