GM V2H Bundle - NEED-TO-KNOW ACTION ITEMS; Charging Your GM EV

10
GM Energy V2H Bundle User Manual
NEED-TO-KNOW ACTION ITEMS
Charging Your GM EV
The front of the GM Energy PowerShift Charger has a small LED Indicator light that ashes in different colors and patterns to signal the charging status. When
the circuit breaker is rst turned on, this light will blink with a white light. When it stops blinking, the charger is ready. Now you can begin charging your GM EV.
(Find more Information in the Decoding the Blinking LED Lights section.)
• Fully uncoil the cord of the Charging Coupler from the Charging Holster
• Plug the Charging Coupler into your GM EV’s charging port by pushing it
into your GM EV’s charging outlet until it clicks
• The LED light on the GM Energy PowerShift Charger will blink on and off
with a green light, indicating a charging session is in progress
• When the green LED stops blinking, the GM EV has completed its
charging session
• If you are ready to drive, disconnect the Charging Coupler and secure
it safely on the Charging Holster. Otherwise, leave the Compatible GM EV
plugged in so that it’s always ready in case of a power outage
WARNING
To reduce the risk of strangulation, keep small children away from the cord of the Charging Coupler and ALWAYS stow the Charging
Coupler after use.