GMC Terrain 2025 - Lighting; Exterior Lighting Exterior Lamp Controls; High-Beam Systems

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-18552429) - 2025
110 Lighting
Lighting
Exterior Lighting
E
xterior Lamp Controls .................................110
High-Beam Systems ..................................... 110
Exterior Lamps Off Reminder .......................111
Headlamp High/Low-Beam Changer ......... 111
Flash-to-Pass ....................................................111
Daytime Running Lamps (DRL) ................... 112
Automatic Headlamp System .....................112
Hazard Warning Flashers .............................113
Turn and Lane-Change Signals ....................113
Front Fog Lamps .............................................113
Interior Lighting
Instrument Panel Illumination Control .... 114
Dome Lamps ...................................................114
Reading Lamps ...............................................114
Lighting Features
Entry Lighting .................................................115
Exit Lighting ....................................................115
Battery Load Management ......................... 115
Battery Power Protection ............................116
Exterior Lighting Battery Saver ..................116
Exterior Lighting
Ex
terior Lamp Controls
The exterior lamp control is on the
infotainment screen.
There are four options.
O : Turns off the headlamps and turns on
Daytime Running Lamps (DRL). Turn the
exterior lamp control to O to turn the
automatic headlamps back on.
AUTO: Automatically turns on the headlamps,
parking lamps, taillamps, instrument panel
lights, roof marker lamps (if equipped), license
plate lamps, and DRL (depending on outside
light conditions).
; : Turns on all the parking lamps. If the
vehicle is not in P (Park), it turns on the DRL.
2 : Turns on the headlamps with all the
parking lamps.
For more information on the exterior lamps, see
Exterior Lighting Battery Saver 3116.
High-Beam Systems
In
telliBeam System
If equipped, this system turns the vehicle's
high-beam headlamps on and off according to
surrounding traffic conditions.
The system turns the high-beam headlamps on
when it is dark enough and there is no other
traffic present.
This light \ comes on in the instrument
cluster when the IntelliBeam system is
enabled.
Turning On and Enabling IntelliBeam
To enable or disable the IntelliBeam system,
ensure the headlights are set in the AUTO
position, then go to the infotainment home
screen and select Controls App >Lights >\
Auto High Beams.
Driving with IntelliBeam
The system activates the high beams only
when driving over 40 km/h (25 mph).
The blue high-beam on light appears on the
instrument cluster when the high beams
are on.