GMC Terrain 2025 - Power Door Locks; Delayed Locking

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-18552429) - 2025
Keys, Doors, and Windows 15
Driver Door Key Lock Cylinder Access (In
C
a
se of Dead Battery)
To access the driver door key lock cylinder:
1. Insert the key into the slot at the bottom of
the handle by the key cylinder cover.
2. Rotate the key counterclockwise and
push the key cylinder cover away from
the handle.
3. Remove the key.
To replace the cap:
1. Insert the key into the slot at the bottom of
the handle by the key cylinder cover.
2. Rotate the key counterclockwise and push
the key cylinder cover toward the handle.
3. Check that the cap is secure. Remove
th
e key.
Free-Turning Locks
The door key lock cylinder turns freely when
either the wrong key is used, or the correct key
is not fully inserted. The free-turning door lock
feature prevents the lock cylinder from being
forced open. To reset the lock cylinder, ensure
the correct key is fully inserted into the lock
cylinder. Rotate the key until you feel the lock
cylinder click back into place. Remove the key
and reinsert fully, then rotate the key to unlock
the vehicle.
Power Door Locks
Q : P
ress to lock the doors.
K : Press to unlock the doors.
Delayed Locking
This feature delays the locking of the doors
until five seconds after all doors are closed.
Delayed locking can only be turned on when
the Open Door Anti-Lockout feature has been
turned off.
When Q is pressed on the power door lock
switch while the door is open, achime will
sound three times indicating delayed locking
is active.
The doors will lock automatically five seconds
after all doors are closed. If adoor is reopened
before that time, the five-second timer will
reset when all doors are closed again.
Press Q on the door lock switch again or press
Q on the remote key to lock the doors
immediately.
This feature can also be programmed. To
view available settings from the infotainment
home screen, touch Settings >Vehicle >Power
Door Locks.