GME TX670 - GENERAL OPERATION; BASIC OPERATIONS

TX670 INSTRUCTION MANUAL PAGE 13
GENERAl OPERATION
POWER ON/OFF
Rotate the Volume control clockwise past the ‘click’ to
turn the radio ON. Rotate the control counter-clockwise
past the click to turn the radio OFF again.
ADJUSTING THE VOLUME
Withtheunitpoweredon,rotatetheVolume
control clockwise to increase the volume and counter-
clockwise to decrease the volume.
DISPLAY LIGHTING
The LCD backlighting activates automatically whenever
a key is pressed and turns off automatically after about
5 seconds.
RECEIVING SIGNALS
WhiletheTX670isnotreceivingsignals,itwillremain
in the Standby mode to conserve battery power.
Whenasignalisreceived,theLEDindicatoronthe
upper edge of the radio will light green and the
icon
will appear on the display. Adjust the Volume control
for a comfortable listening level.
If the incoming signal is encoded with a CTCSS
tonethatmatchestheonesetinyourradio,theLED
indicator will light orange and you will be able to hear
the signal in the speaker.
If the LED indicator lights green and the
icon
appearsbutyoucannothearthesignal,itislikelythat
your radio has CTCSS enabled and the incoming signal
is not using your selected CTCSS tone (see ‘Mode
Settings’ for more details on CTCSS settings).