GME TX670 - SQUELCH SETTINGS

PAGE 22 INSTRUCTION MANUAL TX670
1. Press the MODE key FOUR (4) times to select the
Dual Watch setting mode. The ‘DW’ icon will flash on
the display.
2. Press the
or keys to select the Dual Watch
channel number. To disable the Dual Watch Mode
altogether select ‘oF‘.
3. Press the MODE or PTT key momentarily to confirm
and store your Dual Watch channel selection ‘DW’
will be displayed at the top of the LCD and the
display will now alternate between the currently
selected channel and the Dual Watch channel.
ToEXITtheDualWatchmode,momentarilypressthe
SCAN key. This is equivalent to setting the Dual Watch
mode to ‘oF‘.
Dual Watch Operation
• IfasignalisreceivedontheDualWatchchannel,
the radio will pause on that channel for as long as
itremainsbusy,thenresumetheDualWatchve(5)
seconds after the last transmission has ceased.
• Ifyouwishtotalkonthebusychannel,pressthe
PTT switch while the radio is locked onto that
channel then talk in the usual way.
• Ifyouwishtotalkontheselectedchannel,pressthe
PTT switch while no signals are being received. The
radio will switch to the selected channel.
5. SQUELCH SETTINGS
The ‘Squelch’ mode lets you adjust the receiving
sensitivity.ThehighertheSquelchlevelisset,the
stronger the signal needs to be for it to be received by
the radio.