GME TX670 - Call Alarm Selection

PAGE 24 INSTRUCTION MANUAL TX670
To turn the Button Beeps Tones On or Off
From the ‘Standby’ mode:
1. Press the MODE key SEVEN (7) times to select the
Button Beep setting mode. ‘bP’ will be displayed
along with a flashing
icon.
2. Press the
or keys to set the beep to ‘On‘ or ‘oF‘
as desired.
3. Press the MODE or PTT key momentarily to
confirm and store your selection. If the Button Beep
functionison,the
icon will remain steady on the
display and a beep will be heard in response to
key activation.
8. CALL ALARM SELECTION
The TX670 provides 5 user selectable call alarm
melodies to alert other users to your incoming call.
Whenenabled,themelodycanbetransmittedto
another user where it will be heard in the speaker of
the receiving radio.
To select your favourite Call Alarm Melody
From the ‘Standby’ mode:
1. Press the MODE key EIGHT (8) times to select the
Call Alarm setting mode. ‘C’ will be displayed.
2. Press the or keys to preview (listen) to the 5
available call melodies.
3.Toturnthecallmelodiesoff,select‘oF‘.
4. Press the MODE or PTT key momentarily to confirm
and store your selection.