GME TX670 - Mode;Key-Lock Function

will be skipped upon scanning. All channels are saved
toMemoryduringmanufacture.TodisabletheMemory,
press and hold the SCAN/MEM key.
MODE/KEY-LOCK KEY
Mode Function
The MODE key is used to set the various feature settings
of the TX670. The following chart shows the order of
these selections:
Standby Mode:
1. CTCSS Code Selection
2. Transmitter Power
3. VOX Settings
4. Dual Watch Channel
5. Squelch Settings
6. Roger Beep Tone Selection
7. Button Beep Tone Selection
8. Call Alarm Selection
Key-Lock Function
The Key-Lock function disables the keys to prevent
accidental key presses from changing the preferred
settings of the radio. When thekeysarelocked,the
Icon is displayed and all key presses are ignored except
for the PTT and Key-Lock functions.
ToactivatetheKey-Lock,pressandholdtheMODE
button for about 2 seconds. The
icon will appear on
thedisplay.TocanceltheKey-Lock,pressandholdthe
MODE button again. The icon will disappear from
the display.
PAGE 18 INSTRUCTION MANUAL TX670