GME TX670 - Page 17

TX670 INSTRUCTION MANUAL PAGE 17
thechannels.Whilescanning,brieypressthe or
keys to select the scan direction.
ToexittheScanmode,brieypresstheSCAN key
again. The TX670 will return to normal operation and
‘SCAN’ will disappear from the display.
Scanning Features
• Ifasignalisreceived,thescanispaused,allowing
you to transmit and receive on that channel. The
radio will automatically resume scanning a few
seconds after the last reception or transmission.
• PressthePTT switch while the unit is scanning to
jump to the home channel (the home channel is the
channel the radio was on at the time scanning was
activated). You can then transmit and receive on
that channel. The radio will automatically resume
scanning a few seconds after the last reception or
transmission.
•
Whentheunithasstoppedonabusychannel,press
the or keys to ‘skip’ over the busy channel and
continue scanning.
TIP: The Scan mode will reduce the overall battery life
because the Standby (battery saver) feature is overridden.
You should avoid scanning if the batteries are running low
and you need to conserve power.
Memory Function
The Memory function enables and disables the current
channel to be memorised into the scanning list. When
the channel is memorised with the ‘MEM’ icon on
theLCD,scanningwillincludethechannel.Whenthe
channelisdeletedfromthescanninglist,thechannel