GME TX685 - Transmitter Power; Voice Scrambler; Vox Settings

TX6150/TX685 INSTRUCTIONMANUAL PAGE13
To Enable Silent Mode on a Channel
1. Selecttherequiredchannel.
2. PressandholdtheSQLkeyforabout2seconds.Theselectedcodenumberwillbedisplayedon
thatchannel.
3. Theselectedchannelwillnowremainsilentunlessasignalisreceivedcontainingthechosen
tone/code.
NOTE: Silentmodewillonlybeenabledonchannelsyouselect.Otherchannelswillremainopento
allincomingsignals.
To Disable Silent Mode on a Channel
1. Selecttherequiredchannel.
2. PressandholdtheSQLkeyforabout2seconds.Theselectedcodenumberwillbedisappear
fromthatchannel.Theselectedchannelwillnowbeopentoallincomingsignals.
Transmitter Power
ThetransmitterpowercanbesettoHighorLow.Thepowersettingappliestoallchannels(except5/35).
To Set the Transmit Power
1. PressandholdtheMENUkeyuntiltheradiobeeps.
2. BrieypresstheMENUkeyrepeatedlyuntil‘PW’isdisplayed.‘Hi’or‘Lo’willbeashing.
3. Pressthe
or keystoselecttherequiredpowersetting.Select‘Hi’forhighpoweror‘Lo’for
lowpower.
4. PressthePTTtoconrmandstoreyourselection.
Theradioshouldnowdisplaytheselectedchannelnumberalongwiththe
or icon to indicate
thetransmitpoweryouhaveset.
Voice Scrambler
Yourradioincorporatesavoicescramblerusingbandinversion.Thescrambleriscompatible
withthemajorityofscramblersusedbyothermanufacturers,allowingyoutoenjoyscrambled
communicationswithownersofnon-GMEradios.
To Enable or Disable the Scrambler
1. PressandholdtheMENUkeyuntiltheradiobeeps.
2. BrieypresstheMENUkeyrepeatedlyuntil‘SR’isdisplayed.The iconwillbeashing.
3. Pressthe
or keystoselect‘on’or‘oF’.
4. PressthePTTtoconrmandstoreyourselection.
Whenthescramblerisonthe
iconisdisplayed.
NOTE: Whenthescramblerisenabled,allchannelsarescrambled.
VOX Settings
TheVOXfeatureallowsyoutohavehands-freeconversations.Whenyouspeak,themicrophone
automaticallydetectsyourvoice(orothernearbysound)causingtheradiototransmitwithoutthe
needtopressthePTTbutton.
To Set the Radio for VOX Operation
1. PressandholdtheMENUkeyuntiltheradiobeeps.
2. BrieypresstheMENUkeyrepeatedlyuntil‘VX’isdisplayed.
3. Pressthe
or keystosettheVOXsensitivityfrom1(min)to3(max).Aminimumsetting
requiresaloudervoicetoactivatetheVOXwhileamaximumsettingwillactivatetheVOXwith
amuchsoftervoice.