0.1.2 RULES REFERENCE
For all definitions not included in this manual please refer to rules and local laws in force, following, particularly:
- EN 81-2: Safety rules for the construction and installation of lifts,
- UNI–EN-ISO-14121: Safety of machinery - Principles for risk assessment,
- ISO 3864: Safety colours and safety signs
- MD 2006/42: Machine directive.
0.2 INSTALLATION RELATED DOCUMENTS
The documents to use for the installation are those required by the EN81-20:2014 and by the rules in force,
particularly the following:
- THIS INSTALLATION MANUAL
- WIRING AND HYDRAULIC DIAGRAMS (EN81-20 7.3.2.A.6 AND 7).
All the documentation for a correct and safe installation must be stored by the installation responsible.
Please remember that this documentation is considered part of the plant and must be complete, well stored and
unabridged in every part.
In order to maintain the readability, the documentation shouldn’t be damaged and shouldn’t have missing parts.
Moreover, do not tear or deteriorate sheets during consulting.
0.3 SAFETY PRECAUTION DURING INSTALLATION
WARNING
Before starting all kind of installation operation:
ALWAYS verify that all the safety devices, mechanical or electrical, are active and working properly.
0.4 TOOLING
Use standard building-yard tooling for the installation.
0.5 GENERAL ORDERS
The valves shall be maintained in good working order in accordance with the Standards.
To this effect, regular maintenance of the installation shall be carried out, to ensure, in particular, the safety of
the installation.
The safety of an installation shall take into account the ability to be maintained without causing injury or damage
to health.
Regular maintenance of the installation shall be carried out to ensure the reliability of the installation.
The access and the associated environment shall be maintained in good working order.
The competence of the maintenance person within the maintenance organization shall be continuously updated.
To Next Page
Loading...
Need help?
General
