go-e Controller User Manual

2828 2929
10a. Commissioning/operation on the device
25. Energies
24. Main menu / Energies
In this submenu you can see for each category
its current energy.
Press the > key to select the "Energies" menu
item.
26. Settings / Categories
Press the > key to select the menu item "Cate-
gories".
21. Chargers / My Chargers / Detail view
In the detailed view of a Charger, you can see
more information about its current charging
status. You can navigate with the up and down
buttons.
Important: The actual settings for the charging
process with or without PV surplus or with re-
gard to dynamic load balancing needs to be de-
ned directly for the respective Charger in the
go-e app.
22. Settings / Outputs
23. Outputs
Press the > key to select the "Powers" menu
item.
In this submenu you can see the current power
of the individual categories.

go-e Controller Specifications

General

Enclosure	Plastic
Communication Interface	WiFi
Protocols	Modbus
Output Voltage	230 V
Frequency	50 Hz
Protection	Overcurrent, Overvoltage