4040 4141
Settings /
Controller Display Settings
All connection settings are made in the "Inter-
net" menu item. In addition to WiFi or Ethernet,
additional connections can be dened for ex-
perts and integrators. The status of all network
connections can be called up via the "Network
status" display.
In the subitem "My go-e Controller" you can
view information about the hardware. There
you will nd, for example, the serial number.
You can also reboot the Controller and down-
load the latest rmware.
Internet Settings
Switching between Controller and
Charger
Now let's look at the settings for PV surplus
charging and load balancing.
Tap the image of the Controller or its name at
the upper left corner to go to the selection page
with the list of available devices. There, select
the Charger for which you want to make set-
tings for PV surplus charging or load balancing.
In this submenu you can set e.g. the following
as on the Controller itself:
1. rotate the display by 180° if you have
mounted the Controller upside down due
to lack of space
2. select your preferred language
3. adjust the brightness of the display
4. modify the brightness of the display
during inactivity
5. dene after which period of inactivity the
display should go o completely
10b. Commissioning/operation via app
To Next Page
Loading...
Need help?
General