Name: Go! Go! Elite Traveller Plus
Brand: Go! Go!
Rating: 4 (1 reviews)

To Next Page

To Previous Page

VI. COMFORT ADJUSTMENTS

Figure 19. Front Storage Area

Figure 18. Seat Height Adjustment

UPPER SEAT POST

LOWER SEAT POST

DETENT PIN

SEAT HEIGHT ADJUSTMENT

The seat can be repositioned to different heights.

See figure 18.

1. Remove the seat and battery pack from your

Travel Scooter.

2. Use the attached ring to pull and remove the

detent pin from the lower seat post.

3. Raise or lower the upper seat post to the desired

seat height.

4. While holding the upper seat post at that height,

align the adjustment holes of the upper and

lower seat posts.

5. Fully insert the detent pin.

6. Replace the battery pack and seat.

FRONT STORAGE AREA

Your Travel Scooter is equipped with a front stor-

age area that can be removed if additional leg or

foot room is needed. See figure 19. Remove the

screws to separate the small basket from the Travel

Scooter.

NOTE: As a precaution, avoid placing wallets,

keys, or valuable items in the storage area.

SCREWS

REMOVABLE STORAGE AREA

Questions and Answers:

Need help?

Do you have a question about the Go! Go! Elite Traveller Plus and is the answer not in the manual?

Go! Go! Elite Traveller Plus Specifications

General