Go Power GP-PWM-30-UL User Manual

GP-PWM-30-UL
_________________________________________________________________________________
15
© 2018 GoPower!
WARNING: When the photovoltaic (solar) array is
exposed to light, it supplies a dc voltage to this
equipment
AVERTISSEMENT : Lorsque le panneau photovoltaïque
(solaire) est exposé à la lumière, il fournit une tension cc à cet
équipement.
7.0 Operating Instructions
7.1 Power Up
When the GP-PWM-30-
UL is connected to the
battery, the controller will
go into Power Up mode.
Icons Displayed: All
segments of the
numerical display;
Backlight blinks
Depending on the
battery voltage when the GP-PWM-30-UL Power Up occurs, the
controller may do a Boost Charge or quickly go into Float Charge. The
Charging Profile selected will commence the following day after a Power
Up (refer to the Charging Profile Chart on page 17 for more details).
7.2 Setting the Battery Type and Charging Profile
Setting Battery 1
To set the battery type for
Battery 1, hold the B
Button for 3 seconds.
When the display shows a
blinking number 1,
release the B Button.
GP-PWM-30-UL Solar Controller
GP-PWM-30-UL Solar Controller

Go Power GP-PWM-30-UL Specifications

General

Brand	Go Power
Model	GP-PWM-30-UL
Category	Controller
Language	English