EasyManuals Logo

Go Power GP-PWM-30-UL User Manual

Go Power GP-PWM-30-UL
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
GP-PWM-30-UL
_________________________________________________________________________________
5
© 2018 GoPower!
PV CHARGE CONTROLLER
ALSO FOR LAND VEHICLES
NO. E497008
1.4 Low Voltage Disconnect Function (USB Port)
To prevent the battery against over-discharge this function automatically
switches off the USB output port when Battery 1 voltage is lower than
11.0 VDC. As soon as Battery 1 reaches a voltage of 12.8 VDC the USB
output port is switched on again.
1.5 Regulatory Information
1.6 Specifications
Description
Value
Dimensions
(H x W x D):
108 x 190 x 35 mm
4.25 x 7.48 x 1.38 in
Weight: 300g / 10.6 oz
Maximum Wire Gauge:
#4 AWG
Warranty: 5 years
PWM Charging
3 Battery Charging
profiles
4 Stage Charging
Monthly Equalize
option
Displays Charging
Current, Battery
Voltage and Battery
State of Charge
Reverse Polarity
protected
Temperature
Compensated
Model
GP-PWM-30-UL
Nominal System Voltage
12 VDC
Charging Output Voltage
Range Battery 1
9.0 – 14.9 VDC
Charging Output Voltage
Range Battery 2
9.0 – 14.9 VDC
Maximum Charge Current
Battery 1
37.5A
Maximum Charge Current
Battery 2
37.5A
Maximum DC Input Voltage
35.0 VDC
Range of DC Input Voltage
9.0 – 35.0 VDC
Maximum DC Input
Operating Current
37.5 A
Maximum DC Short Circuit
Current
37.5
Max. Series Fuse or Circuit
Breaker
Solar/Battery 1/Battery 2
50 A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Go Power GP-PWM-30-UL and is the answer not in the manual?

Go Power GP-PWM-30-UL Specifications

General IconGeneral
BrandGo Power
ModelGP-PWM-30-UL
CategoryController
LanguageEnglish

Related product manuals