34
Detaching the camera ash：
Press and rotate the hot shoe xing
buckle to the left until it is loosened,
then take off the camera flash.
Then rotate it to the right until it locks
up.
Installing/Detaching SU-1
1. SU-1 is not useable in wireless transmission shooting.
2. SU-1 is not useable in high-speed sync.
3. The flash head need to be uplifted in order to use SU-1 properly.
Note
：
Instructions for Using
Mount SU-1 directly to the external flash
interface of V1Pro C, press the MODEL
button to set the flash to M (manual)
flash/TTL auto flash mode, then press
function button 4 <SUB> to enter sub
flash settings interface, and press
function button 3 <ON/OFF> to turn on/
off.
When the sub flash is turned on, turn the
select dial can adjust flash output of the
sub flash from 1/128 to 1/1 in 22 flash
steps, with +1/3 increment each step.
Using SU-1
With detachable sub flash SU-1 attached
to the external flash interface of V1Pro C,
better lling light effects can be achieved
in M (manual) flash/TTL auto flash mode,
this is helpful for portrait shooting.
Installing:
Align the detachable sub flash
SU-1 with the external flash
interface of V1Pro C and insert it
parallelly, a "click" sound means
it’s properly installed.
Detaching:
Push the detaching pusher on
SU-1 and pull it up at the same
time to detach it.
To Next Page
Loading...
