EasyManua.ls Logo

Godox V1C User Manual

Godox V1C
205 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
V1C
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

Other manuals for Godox V1C

Question and Answer IconNeed help?

Do you have a question about the Godox V1C and is the answer not in the manual?

Godox V1C Specifications

General IconGeneral
Battery Capacity2600 mAh
Color Temperature5600K ± 200K
Zoom Range28-105mm
Wireless Channels32
Power Output1/1 to 1/256
Compatible CamerasCanon
Flash Duration1/300 to 1/20000 sec
Recycle Time1.5 seconds
BatteryLithium-Ion
TypeOn-camera flash
Exposure ControlTTL, Manual
Wireless OperationRadio (2.4 GHz)
Wireless Groups5
Power SourceRechargeable Li-ion battery
Battery LifeApprox. 480 full-power flashes
Wireless ControlYes

Summary

Foreword and Warnings

General Safety Precautions

Essential safety warnings and precautions to follow during use and handling of the flash unit.

Name of Parts

Control Panel

LCD Panel

Radio Transmission Shooting

Transmitter Unit (TX) Setup

Details the setup and function of the flash unit as a transmitter.

Receiver Unit (RX) Setup

Details the setup and function of the flash unit as a receiver.

Battery

Battery Features and Cautions

Outlines the features of the Li-ion battery and provides important safety precautions for its use.

Attaching to a Camera

Power Management

Flash Mode: E-TTL AutoFlash

ETTL Mode Operation

Details how to use the E-TTL autoflash mode, including focusing and flash firing.

Flash Exposure Compensation (FEC)

Explains how to adjust flash output to compensate for exposure errors in E-TTL mode.

FEB: Flash Exposure Bracketing

FEL: Flash Exposure Lock

High-Speed Sync

M: Manual Flash

Manual Flash Settings and Output

Guides on setting manual flash output from 1/1 to 1/256 power.

Multi: Stroboscopic Flash

Wireless Flash Shooting: Radio (2.4G) Transmission

Transmitter and Receiver Unit Setup

Explains how to set up the flash unit as a transmitter and receiver for wireless shooting.

Wireless Multiple Flash Shooting

Wireless Settings

Transmitter Unit Wireless Setting

Guides on configuring the transmitter unit for wireless communication (ON/OFF).

Receiver Unit Wireless Setting

Guides on configuring the receiver unit for wireless communication.

Setting the Communication Channel

Channel ID Configuration

Details how to set channel IDs to avoid interference and ensure proper communication.

Wireless ID Settings

Wireless ID Configuration

Explains setting wireless IDs to prevent interference and ensure trigger accuracy.

ETTL: Fully Automatic Wireless Flash Shooting

Single Receiver Unit Setup

Step-by-step guide for setting up the flash for E-TTL wireless shooting with one receiver.

Using Automatic Wireless Flash with Multiple Receiver Units

Multiple Receiver Unit Setup Guide

Instructions for setting up multiple receiver units for automated wireless flash.

Using Fully Automatic Wireless Flash

M: Wireless Flash Shooting with Manual Flash

Manual Wireless Flash Setup Guide

Guides on setting up wireless shooting using manual flash mode.

Multi: Wireless Flash Shooting with Manual Flash

Bounce Flash

ZOOM: Setting the Flash Coverage

C.Fn: Setting Custom Functions

Custom Function Setup Guide

Lists available custom functions (C.Fn) and their settings and how to configure them.

Control with the Camera's Menu Screen

Protection Function

Troubleshooting

Flash Not Firing Solutions

Provides solutions for when the camera flash fails to fire.

Power Turns Off Automatically Solutions

Addresses issues where the flash unit powers off unexpectedly.

Exposure Issue Solutions

Offers tips for resolving underexposed or overexposed flash results.

Firmware Upgrade

Maintenance

Related product manuals