Godox V1C - FEB: Flash Exposure Bracketing; FEL: Flash Exposure Lock

16
FEB: Flash Exposure Bracketing
You can take three flash shots while automatically changing the flash output for each
shot from -3 to +3 in 1/3rd stops. The camera will record three images with different
exposures: one exposed according to camera calculations, one over-exposed and
another under-exposed. Over and under exposure amount is user adjustable. This
function helps get correct exposure especially in shooting moving objects or when
environmental lights are complex.
Press function button 3
<FEB icon>. The icon
< > and the exposure
will be highlighted on the
LCD panel.
Set the flash exposure
compensation amount.
• Turn the Select Dial
to set amount.
• “0.3” means 1/3
step, “0.7” means
2/3 step.
Press Set Button again to
confirm the setting. Then
your FEC and FEB settings
are displayed on the LCD
panel.
• FEB will be cancelled after three photos are taken.
• For best result, set the camera drive mode to “single” and ensure the flash is
ready before shooting.
• FEB can be used with FEC and FEL.
You can prevent the FEB from being cancelled automatically after three
photos are taken. (C.Fn-FEB ACL)
FEL: Flash Exposure Lock
FEL can lock the correct flash exposure setting for any part of the scene.
With <ETTL> displayed on the LCD panel, press the camera’s <FEL> button. If the camera
does not have the <FEL> button, press <*> button.