13
According to the triangle sign on the battery pack, insert it into the compartment until a
while knob lock the battery with a click sound.
Battery Level Indication
Make sure the battery pack is securely loaded in the flash. Check the battery level
indication on the LCD panel to see the remaining battery level.
Lower battery, please recharge it
The battery level is going to be used out
immediately. And the flash will auto
power in 1 minute.
Note: Please recharge the battery as soon
as possible (within 10 days). Then, the
battery be used or be placed for long
period.
Led Modeling Lamp
Press the Modeling Lamp Setting button to set the modeling lamp. Short press the Set
Button to turn on or off the modeling lamp. When turning the modeling lamp on, turn
the select dial to set its brightness. There are 10 levels (01~10) for choice.
To Next Page
Loading...
