Godox V1C - M: Manual Flash; Manual Flash Settings and Output

18
Second-Curtain Sync
With a slow shutter speed, you can create a light train following the subject. The flash
fires right before the shutter closes.
Press function button 2 <SYNC> button so that < > is displayed on the LCD panel.
M: Manual Flash
The flash output is adjustable from 1/1 full power to 1/256th power in 1/10th stop
increments. To obtain a correct flash exposure, use a hand-held flash meter to
determine the required flash output.
Press <MODE> button so
that <M> is displayed.
Turn the Select Dial to
choose a desired flash
output amount.
Press Set button again to
confirm the setting.