EasyManua.ls Logo

Gogoro S2 - Regular Service and Maintenance

Default Icon
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Plug and remove the USB cable smoothly when using the USB charger port in the
compartment. Do not pull out the connector by grabbing the cable and dragging /
shaking it, or the charger port might be damaged.
Regular Service and Maintenance
Newly delivered Smartscooter® should return to a Gogoro service center for its first
inspection after 1,000 kilometers or 2 months.
It’s recommended to bring your Smartscooter® back to a Gogoro service center for
regular inspection and maintenance every 3,000 kilometers or every six months
(whichever comes first).
32
Remove the primary battery plug improperly may cause damage and
malfunction, which is not included in warranty.
Primary battery exhaust caused by leaving Gogoro Network™ Smart Battery not
in the trunk is not included in warranty.
Do not use any kind of organic solvent, strong detergent, acidic or alkaline
cleaning agent, abrasives, scouring pads, steel wool, metal brushes or
sandpaper to clean the vehicle, to avoid damaging the exterior surface.
Do not use any kind of wax or polishing agent on matte or non-glossy surface, no
matter what material it is, and do not wipe or rub strongly, to avoid damaging the
exterior surface.
Do not use any detergent or wax on the brake system, to avoid damaging the
brake and causing danger.
Please use lubricants for the sealed roller chain to lube the driving chain.
Products with spray nozzles are recommended. Do not use any kind of solvent,
detergent, derusting solution or any other non chain lubricant (i.e. gasoline,
diesel, toluene, acetone, WD-40, acid/alkaline detergent, etc.)
Ensure the motor is off and locked when using road chain lube.

Related product manuals