golmar 7W/G2+ - Special Codes - Configuration Details; Video Source and Door Panel Codes; Display, Recording, and Icon Codes; Activation, Output, and Delay Codes

28
SPECIAL CODES
Configuration of the remote activation button (Door panel 1). (Configure only on the master monitor).Relay2
Delay From to0400 (0,5s) 0419 (10s) 0403 (2s)
Delay From 5 to 5 50 00 (0,5s) 0 19 (10s) 0 03 (2s)
Factory setting
Configuration of the remote activation button (Door panel 1). (Configure only on the master monitor).Relay1
Factory setting
Visible Not visible Factory setting
Camera 1 0141 0140 0140
Video sources available on a monitor (configure only on the master monitor).
Door panel 1 0111 0110 0111
Door panel 2 0121 0120 0120
Door panel 3 0131 0130 0130
Door panel 4 0151 0150 0150
Camera 2 0181 0180 0180
Camera 3 0171 0170 0170
Camera 4 0191 0190 0190
Important: .Not available
Automatic door opening upon reception of a call on a monitor (configure only on the master monitor).
Activated Deactivated Factory setting
0441 0440 0440
Activate/deactivate the hidden start/stop communication and door opening button on a monitor (hidden
buttons located above raised dots / for the visually impaired).
Rel 0300 (0,5s) 0319 (10s) 0305 (3s)ay 2 From to
0541 0540 0541 ( )
enable
Relay 1 From to0200 (0,5s) 0219 (10s) 0205 (3s)
0471 0470 0471 (activated)
ShowDo not show Factory setting
Do not show the image on the monitor when receiving a call from the door panel when the monitor is in 'Do not
disturb' mode.
0531 0530 0531 ( )activated
0450 0451 0452 0450 (automatic).
0481 0480 0480 (show image)
Activate/ deactivate the in all monitors (building).images recording
Enable/ disable the icon of the main menu in all monitors (building).
te teActiva Deactiva Factory setting
Activation times of the outputs (Door panel 1). (Configure only on the master monitor).
0461 0460 0460(deactivated)
teActiva Deactivate Factory setting
Activate/deactivate the ('power indicator' notification icon) on a monitor.
Activate Deactivate Factory setting
LED lights for night viewing (Door panel 1) during a call or communication process. (Configure only on the
master monitor).
Enable Disable Factory setting
Automatic OFFAlways ON Always Factory setting
Factory setting
Continued from previous page.
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
*
( )
ART MONITOR7W/G2+