Goodall Viper - Lowering the Mainsail; Jib; Jib Sheet

Viper Owner's Manual 34
The clip on the end of the cunningham rope hooks
into the hole the mast spanner.
3.9.3 LOWERING THE MAINSAIL
Before lowering the mainsail remove the Cunningham, mainsheet and boom from the sail.
Pull the halyard and rotate the mast whilst keeping pressure on the halyard, this should turn the hook
out of the ring at the top of the mast. With the mast still rotated, release the halyard and pull down on
the sail. Then release the mast rotation. The sail should come freely down now. Before rolling up the
main sail take out the batten nr.1 from the top pocket and stow it in a lower pocket.
3.10 Jib
3.10.1 JIB SHEET