These furnaces comply with requirements embod-
ied in the American National Standard / National
Standard of Canada ANSI Z21.47·CSA-2.3 Gas Fired
Central Furnaces.
Installer: Affix all manuals adjacent to the unit.
*NOTE: Please contact your distributor
or our website for the applicable
Specification Sheet referred to in this manual.
ATTENTION INSTALLING PERSONNEL
As a professional installer you have an obligation to know the product better than the customer. This includes all
safety precautions and related items.
Prior to actual installation, thoroughly familiarize yourself with this Instruction Manual. Pay special attention to all
safety warnings. Often during installation or repair it is possible to place yourself in a position which is more
hazardous than when the unit is in operation.
Remember, it is your responsibility to install the product safely and to know it well enough to be able to instruct a
customer in its safe use.
Safety is a matter of common sense...a matter of thinking before acting. Most dealers have a list of specific good
safety practices...follow them.
The precautions listed in this Installation Manual are intended as supplemental to existing practices. However, if
there is a direct conflict between existing practices and the content of this manual, the precautions listed here
take precedence.
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
I
NSTALLATION
I
NSTRUCTIONS
FOR
*CVC9/95 & *MVC95 - T
WO
-S
TAGE
G
AS
F
URNACE
(Type FSP CATEGORY IV Direct or Non Direct Vent Air Furnace)
IO-430C
05/13
Goodman Manufacturing Company, L.P.
5151 San Felipe Suite 500
Houston, TX 77056
www.goodmanmfg.com • www.amana-hac.com
© 2009 - 2013 Goodman Manufacturing Company, L.P.
To Next Page
General