330368
Quick Setup3
Power On/Off and Function Selection
1. This 30W 2.0 Compact Bluetooth Soundbar is supplied with a mains aduptor.
2. Insert the UK plug into a household power socket, and
switch the power on.
3. Press the button to turn the unit on.
4. Press the button to select Bluetooth/Line in/Aux model
5. You can change the auto off standby function on your soundbar by doing the following:
1. With the soundbar in standby mode, press the and buttons for 10 seconds.
2. The lights on the soundbar will flash slowly. This confirms that auto standby function is
now turned off.
To turn the auto standby function back on please complete the following:
1. With the soundbar in standby mode, press the and buttons for 10 seconds.
2. The lights on the soundbar will flash fast. This confirms that the auto standby function
is now turned on.
Auto Power Off
If no audio signal is continuously detected from the selected mode in for more than 18 minutes,
the unit will power-off automatically.
3.1
3.2
Adjusting the Volume
Press the + button or - button in the side panel of the soundbar to adjust the volume to
a comfortable level.
3.3
-
To connect the power insert the small end in the rear of the unit.
To Next Page
Loading...
