334149
Problem What to do
Soundbar does not respond
(no power).
Check the mains power cable and make sure it is
plugged into a suitable power outlet.
No sound.
The Remote Control does not work.
No sound in Bluetooth mode.
Troubleshooting8
Check that the mains power supply is switched on.
Connect the power to a different power outlet.
Check the Soundbar volume control is not at minimum.
Check that the Soundbar is not set to MUTE.
If you are connecting to the Soundbar using a
headphones port on your extemal audio device then
check the volume is turned up on that device.
Replace the battery.
Make sure there are no obstacles obscuring the
Soundbar.
Check that the Soundbar is Paired with a Bluetooth
device. If prompted enter the code ‘0000’.
Technical Specification9
Power Supply
Model Number
100-240V~, 50/60Hz
334149
Power Source of Soundbar DC 18V 3A
AC Adapter Input: 100-240V~, 50/60 Hz, 1.8A
Output: 18V, 3A
Bluetooth Specification
V4.2
Frequency Bands
2402MHz - 2480 MHz
Modulation type
GFSK, π/4 DQPSK
EIRP Power
-4.48 dBm
Environmental and storage
conditions:
10 °C to 35 °C Relative humidity 40 to 85 %
Power Source of Remote Control DC 3V, 2 X R03 Battery (supplied)
Power Consumption < 55W
Audio Power
Impedance
Left Channel 15W,
Subwoofer Channel 50W
Right Channel 15W
1 x Left Channel 4Ω, 1 x Right Channel 4Ω
Subwoofer Channel 4Ω
To Next Page
Loading...
