Goodwe EH Series User Manual

51
User Manual V1.4-2022-08-30 09 Maintenance
9.5 Routine Maintenance
Maintaining Item Maintaining Method Maintaining Period
System Clean
Check the heat sink, air intake, and air
outlet for foreign matter or dust.
Once 6-12 months
DC Switch
Turn the DC switch on and o ten
consecutive times to make sure that it is
working properly.
Once a year
Electrical Connection
Check whether the cables are securely
connected. Check whether the cables are
broken or whether there is any exposed
copper core.
Once 6-12 months
Sealing
Check whether all the terminals and ports
are properly sealed. Reseal the cable hole
if it is not sealed or too big.
Once a year
THDi Test
For Australia requirements, in the THDi
test, there should add Zref between
inverter and mains.
L: 0.24 Ω + j0.15 Ω; N:0.16 Ω +j0.10 Ω
L: 0.15 Ω + j0.15 Ω ; N:0.1 Ω + j0.1 Ω
As needed.
WARNING
• Make sure that the inverter is powered o.
• Wear proper PPE before any operations.

Goodwe EH Series Specifications

General

Type	Hybrid Inverter
Number of MPPTs	2
THDi	<3%
DC Switch	Integrated
Protection Degree	IP65
Max. Charging/Discharging Power	5kW
Battery Voltage Range	40V to 60V
Nominal AC Voltage	230V
Operating Temperature Range	-25°C to 60°C
Cooling Method	Natural Convection
Communication	RS485
Battery Type	Lithium
AC Output Voltage	230V
AC Output Frequency	50/60 Hz