EasyManuals Logo

Goodwe EH Series User Manual

Goodwe EH Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
3
User Manual V1.4-2022-08-30 02 Safety Precaution
2 Safety Precaution
2.1 General Safety
2.2 PV String Safety
NOTICE
The information in this user manual is subject to change due to product updates or other
reasons. This guide cannot replace the product warning labels unless otherwise specied.
All descriptions here are for guidance only.
Before installations, read through the user manual to learn about the product and the
precautions.
All operations should be performed by trained and knowledgeable technicians who are
familiar with local standards and safety regulations.
Use insulating tools and wear personal protective equipment when operating the
equipment to ensure personal safety. Wear anti-static gloves, clothes, and wrist strips
when touching electron devices to protect the inverter from damage.
Strictly follow the installation, operation, and conguration instructions in this manual.
The manufacturer shall not be liable for equipment damage or personal injury if you do
not follow the instructions. For more warranty details, please visit https://en.goodwe.com/
warranty.
NOTICE
The inverters are designed and tested strictly in compliance with related safety rules. Read and
follow all the safety instructions and cautions before any operations. Improper operation might
cause personal injury or property damage as the inverters are electrical equipment.
DANGER
Connect the DC cables of the inverter to the delivered DC terminals. Severe damage might
happen if other types of DC terminals are used, which are beyond the manufacturers liability.
WARNING
Ensure the component frames and the bracket system are securely grounded.
Ensure the DC cables are connected tightly, securely and correctly.
Measure the DC cables with a multimeter to avoid reverse polarity connection. Also, the
voltage should be under the permissible range.
Do not connect one PV string to more than one inverter at the same time. Otherwise, it
may cause damage to the inverter.
Please strictly follow these safety instructions in the user manual during the operation.

Other manuals for Goodwe EH Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Goodwe EH Series and is the answer not in the manual?

Goodwe EH Series Specifications

General IconGeneral
TypeHybrid Inverter
Number of MPPTs2
THDi<3%
DC SwitchIntegrated
Protection DegreeIP65
Max. Charging/Discharging Power5kW
Battery Voltage Range40V to 60V
Nominal AC Voltage230V
Operating Temperature Range-25°C to 60°C
Cooling MethodNatural Convection
CommunicationRS485
Battery TypeLithium
AC Output Voltage230V
AC Output Frequency50/60 Hz

Related product manuals