Goodwe GW5000-EH User Manual (English)

Other manuals for Goodwe GW5000-EH

User Manual68 pages

Quick Installation Guide110 pages

Questions and Answers:

T
Tamara WrightSep 5, 2025
What causes a Cavity Overtemperature error on a Goodwe GW5000-EH Inverter?
- A
  Amy EdwardsSep 5, 2025
  A 'Cavity Overtemperature' error on your Goodwe Inverter can be caused by: 1. The inverter being installed in a poorly ventilated area. 2. The ambient temperature exceeding 60°C. 3. A fault in the inverter's internal fan. To address this: 1. Check the ventilation and ambient temperature at the installation site. 2. Improve ventilation and heat dissipation if needed. 3. If ventilation and temperature are normal, contact the dealer or after-sales service.
S
Susan FosterSep 7, 2025
What does Grid Frequency Instability mean on my Goodwe Inverter?
- P
  powersjessicaSep 7, 2025
  A 'Grid Frequency Instability' error on your Goodwe Inverter indicates a utility grid exception where the actual grid frequency change rate does not meet the local grid standard's requirements. If this occurs occasionally, the utility grid may be temporarily abnormal, and the inverter will recover automatically after detecting that the utility grid is normal. If the problem occurs frequently, check whether the grid frequency is within the permissible range. If the grid frequency exceeds the permissible range, contact the local power company.
C
chasemartinSep 8, 2025
What does Large DC of AC current L1 mean on my Goodwe Inverter?
- J
  James MartinezSep 9, 2025
  A 'Large DC of AC current L1' error on your Goodwe Inverter indicates that the DC component of the output current exceeds the safety or default range. If the problem is caused by an external fault like a utility grid exception or frequency exception, the inverter will recover automatically after solving the problem.
K
kellerabigailSep 10, 2025
What should I do if my Goodwe Inverter displays a DC Arc Fault?
- B
  Brittany WangSep 10, 2025
  A 'DC Arc Fault' error on your Goodwe Inverter can be caused by: 1. A loose DC terminal connection. 2. A broken DC cable. Refer to the Quick Installation Guide to verify that all cables are properly connected.
M
Melissa BoydSep 12, 2025
What does LVRT Undervoltage mean on Goodwe GW5000-EH?
- J
  Jodi HarrisSep 12, 2025
  A 'LVRT Undervoltage' error on your Goodwe Inverter indicates a utility grid exception where the duration of the utility grid exception exceeds the set time of LVRT. If the problem occurs occasionally, the utility grid may be abnormal temporarily, and the inverter will recover automatically after detecting that the utility grid is normal. If the problem occurs frequently, check whether the grid frequency is within the permissible range. If not, contact the local power company.

Goodwe GW5000-EH Specifications

General

Model	GW5000-EH
Type	Hybrid Inverter
Rated Output Power	5000 W
Max DC Input Voltage	600 V
Start Voltage	120V
Number of MPPT	2
Max Input Current per MPPT	11 A
Max AC Apparent Power	5000 VA
Max AC Output Current	22 A
Rated AC Voltage	230 V
AC Voltage Range	180 V - 280 V
Rated Grid Frequency	50/60Hz
Total Harmonic Distortion (THD)	< 3%
Protection Degree	IP65
Topology	Transformerless
Cooling Method	Natural Convection
Power Factor	0.8 leading - 0.8 lagging
DC Injection Current	<0.5% of rated output current
Operating Temperature Range	-25°C to 60°C
Communication	RS485, WiFi, Ethernet