GoPro Hero - Using Auto Exposure Mode; Using Locked Exposure Mode

54 55
TEMPERATURE ICON
The Temperature icon appears on the camera status screen
when the camera becomes too hot and needs to cool
down. Simply let it sit and cool before attempting to use it
again. Your camera was designed to identify conditions of
overheating and will shut down when needed.
FILE REPAIR ICON
If recording was stopped abruptly and the video le was
not properly saved, the le might become corrupted. If this
happens, the camera displays the File Repair icon while it
tries to repair the le. When this process is nished, you will
receive a message stating whether the repair was successful
or not. Press any button to continue using the camera.
MICROSD CARD MESSAGES
NO SD
No card present. The camera requires a microSD,
microSDHC or microSDXC card (sold separately)
to capture videos and photos.
FULL
The card is full. Delete some les or insert a
dierent card.
SD ERR
The camera is unable to read the card formatting.
Reformat the card in the camera.
IMPORTANT MESSAGES RESETTING YOUR CAMERA
RESETTING THE CONNECTIONS
This option clears your connections list and resets the camera’s password.
If you reset the connections, you must reconnect any desired devices to
your GoPro.
1. From the main screen, swipe down.
2. Tap Connect > Reset Connections, and then tap Reset.
RESETTING ALL SETTINGS TO THE DEFAULTS
This option resets all of your camera settings to the defaults, except Date,
Time, and your camera’s username and password.
1. From the main screen, swipe down.
2. Tap Preferences > Camera Defaults, then tap Reset.
RESTARTING YOUR GOPRO
If your camera is not responding, press and hold the Mode button [
]
for eight seconds to shut down the camera and then restart it. All settings
are retained.
RESTORING FACTORY SETTINGS
Follow the steps below to reset all settings and the camera’s password, and
unregister the camera from your GoPro Plus account. This option is useful if
you are reselling your camera and want to reset it to its original state.
1. From the main screen, swipe down.
2. Tap Preferences > Factory Reset, then tap Reset.
Restoring factory settings does not erase all content from your microSD
card. To clear your microSD card, see Reformatting Your microSD Card
(page 8).