Gossen MetraWatt SECUTEST ST BASE - Entry Via External USB Keyboard; Help Functions (HELP Key)

Gossen Metrawatt GmbH 17
Example: Entering a Designation for a DUT
1 Switch the keyboard to uppercase, lowercase or special char-
acters with the abc key (Abc, ABC, Symb).
2 Select the desired alphanumeric character or a line break with
the scroll keys (left, right, up and down). The selection cursor
can be accelerated by pressing and holding the respective
scroll key.
3 After pressing the key, the respective character appears
at the display panel.
4 Repeat steps 1 through 3 until the complete designation
appears at the display panel.
5 The designation at the display panel can be changed subse-
quently by hiding the bottom keyboard by pressing the
key. The cursor position can then be changed in order to
delete individual characters.
6 The value appears at the display after pressing the
green checkmark.
7.3 Entry via External USB Keyboard
Instead of using the touchscreen keyboard, characters can be
entered directly with a USB keyboard which is connected to the
test instrument. See “Connecting and Configuring External
Devices” on page 25.
Note
In order to use a USB keyboard at the test Instrument,
the “Keyboard Layout” settings in Setup must coincide
with the connected keyboard.
Additional Key Functions, DB Comfort Option
(only with SECUTEST DB COMFORT – Z853S or feature KD01)
If feature KD01 has been enabled, which is available for a fee, the
following additional entry options are available via and external
keyboard:
Print  PRINT
ESC  ESC
F1  HELP
F2  MEM
F5  Softkey 1
F6  Softkey 2
F7  Softkey 3
F8  Softkey 4
F9  Softkey 5
F3  Search for test object ID in the database (only in MEM
database management, at the primary level of auto
measurement screens and in green measurement
screens)
F4  Search for “Text” in the database (only in MEM data-
base management, at the primary level of auto mea-
surement screens and in green measurement screens)
Additional key functions within MEM database management:
Cursor  Navigation within the tree
Home  Jump to database root node
End  Jump to end of tree
Tab  Switch between location/customer tree
Insert  Create new object
Delete  Delete object
 (enter) For editable objects: edit object,
for measurements: test list view
+Insert Move object within tree
(simultaneously press the shift and insert keys)
In the event that several objects have been found as the result of
the search:
  Scroll through found objects
(right and left scroll keys)
Additional Key Functions in the Test List View
(when the test report is shown at the display):
  scroll (up and down scroll keys)
  Switch to detail view or back to list of tests steps (right
and left scroll keys)
Tab  Select filter type for test steps
(abridged / failed test steps only / all)
 (Enter)  Exit test list view
7.4 Help Functions (HELP key)
Depending on the rotary selector switch position and the selected
measurement type, appropriate wiring diagrams are displayed.
➭ Press the HELP key in order to query online help.
➭ Press the ESC key in order to exit online help.