Gossen Metrawatt GmbH 23
8.3 Bluetooth
®
Interface (only with feature M01)
The Bluetooth
®
interface facilitates various functions at the test instrument:
• Data transmission (test structure and measurement data) to IZYTRONIQ test software (see section 19)
• Transfer of results to IZYTRONIQ test software (push-print function) (see section 15.4 for single measurements and section 17.7 for
test sequences)
Bluetooth
®
settings are entered under SETUP 3/3 > Bluetooth:
Security
For security reasons, we recommend deactivating the
Bluetooth
®
interface if it’s not needed. (The “not visible”
setting cannot be used as a substitute for shutting down
the Bluetooth
®
interface, because invisible Bluetooth
®
devices can nevertheless be found using the appropriate
means.)
Furthermore, device pairings which will no longer be
required for a lengthy period of time should be deleted.
Use of Multiple Test Instruments (risk of mix-up)
The test instrument’s device name is set to “SECUTEST”
as a default setting. If you access one PC with several
test instruments, their names should differ (or at least be
individually supplemented: SECUTEST1, SECUTEST2
etc.).
Menu selection for operating parameters, page 3 of 3
Setup 3/3
Menus for using the Bluetooth
®
interface
Menu selection for Bluetooth
®
operating parameters
Specifies whether the test instrument can be
found by other Bluetooth
®
devices.*
The name of the test instrument displayed via
the interface can be changed here. *
Find/pair Bluetooth
®
devices, view/edit existing
pairings *
* These submenus only appear if status is set to on.
Search for nearby Bluetooth
®
devices
Paired device found
(white frame) > rename or delete
Not yet paired device found
(blue frame) > pairing PIN entry
Paired device found
(blue frame) > rename or delete
List of already paired devices
Switch Bluetooth
®
interface on/off
Softkeys are keys with functions that vary depending
upon the menu level.
Function Keys
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
To Next Page
Loading...
