Gossen Metrawatt GmbH 13
5.7 Relevant Standards
The test instrument has been manufactured and tested in accor-
dance with the following safety regulations:
EN 61010-1 Safety requirements for electrical equipment for measurement, control
and laboratory use – Part 1: General requirements
EN 60529 Test instruments and test procedures
Degrees of protection provided by enclosures (IP code)
EN 61326-1 Electrical equipment for measurement, control and laboratory use –
EMC requirements – Part 1: General requirements
EN 61326-2
Electrical equipment for measurement, control and laboratory use –
EMC requirements –
Part 2-2: Particular requirements – Test configurations, operational conditions
and performance criteria for sensitive test and measurement equipment for
EMC unprotected applications
EN 61557-16
Electrical safety in low voltage distribution systems up to 1000 V AC
and 1500 V DC – Equipment for testing, measuring or monitoring of
protective measures –
Part 16: Devices for testing the effectiveness of protective measures of
electrical devices and/or electrical medical devices
To Next Page
Loading...
