GPRINTER GP-2120T - 1. Introduction; 1.1 Safety Warning; 1.2 Safety Notice

2
1 、Introduction
Thanks for choosing our new thermal label printer GP-2120T. This product provides
reliable performance and high printing quality at economic price. With powerful functions
and easy operation design, GP-2120T is your best choice of thermal label printer.
CAUTION, NOTE
CAUTION: MUST COMPLY, OTHERWISE HUMAN GET HARM AND DEVICES
DAMAGE.
NOTE: IMPORTANT INFOMATION AND TIPS FOR PRINTERS OPERATION.
SAFETY WARNING
PLEASE READ THE BELOW WARNINGS AND NOTES CAREFULLY BEFORE USING
THE PRINTER.
1.1 SAFETY WARNING
CAUTION: THE PRINT HEAD IS A HEATED PART, PLEASE DO NOT TOUCH THE
PRINT HEAD AND OTHER PARTS AROUND IT IN AND AFTER THE PRINTING
PROCESS.
CAUTION: DO NOT TOUCH THE PRINT HEAD AND PLUG-IN PARTS TO AVOID
PRINT HEAD DAMAGE.
CAUTION: DO NOT TOUCH THE PAPER TEAR-OFF KNIFE TO AVAOD GETTING
HARM.
Thermal Barcode Printer
1.2. Safety Notice:
1. Install the printer on the stable surface.Choose firm and level surface where avoid
vibration.
2. Keep enough space for printer operation and maintenance.
3. Keep printer away from water, sunshine, high lights and heat source.
4. Do not use and store the printer under high temperature, moist and seriously polluted
environment.
5. Avoid to put the printer in shaky areas.
6. Condensation of moisture on the printer surface is not allowed. If failed, do not turn on
the printer until dew disppears.
7. Connect AC power adapter to a proper power outlet. Avoid to use the same outlet with
other large electric machines which generate voltage fluctuation.
8.Please unplug the printer power cord from outlet when you do not plan to use it for long
period.
9.Do not let water or conducting material (eg. metal) into the printer.
10.Do not print when it is out of paper, which will seriously damage the printer head and
rubber roller.
11. Make sure printer power is turned off when connecting and disconnecting with the
interface.
12. When printing quality meet your needs, we recommend you set low grade print
density.
13.Do not try to disassemble, repair or remodel the printer by yourself.