13
5.19.8.1 Activate shock alarm: Send SMS “shock+password” to tracker, it will reply
“shock is activated!”, that means shock alarm function activates successfully. Tracker
will send “sensor alarm+latitude/longtitude” to authorized phone numbers when it
detect shock.
5.19.8.2 Cancel: send SMS “noshock+password” to tracker to cancel this function.
5.19.8.3 Sensitivity configuration ( First level is the default level)
First level: Alarm will be triggered after detect slight vibration, send command"
sensitivity+password+space+1" .
Second level: Alarm will be triggered after detect medium vibration in 2 seconds, send command"
sensitivity+password+space+2".
Third level: Alarm will be triggered after detect heavy vibration in 5 seconds, send command"
sensitivity+password+space+3".
5.20 Sleep Mode
Set Less GPRS Traffic in GPRS Mode
No vibration and no other triggered
alarm, GPRS offline and switch to
“sleep by shock”, and GPRS will back to
online if there is vibration or any
triggered alarm.
SMS, calling or any other triggered
alarm (Vibration excluded) tracker
works for 5 minutes after wake up,
and then back to sleep, GPS module
shut off, GSM module works in low
consumption. SMS, calling or any
other triggered alarm (Vibration
excluded) can awake the tracker.
No vibration and no other triggered
alarm, GPRS offline and switch to
“sleep by shock”, and GPRS will back to
online if there is vibration or any
triggered alarm.
No vibration and other triggered
alarm, tracker will works in “sleep
by shock” mode, GPS shut off,
GSM works in low consumption.
Vibration, SMS, calling or any other
triggered alarm (include vibration)
can awake the tracker.
No vibration and no other triggered
alarm, GPRS offline and switch to
“sleep by shock”, and GPRS will back to
online if there is vibration or any
triggered alarm.
To Next Page
Loading...
