Switching on / switching off
The heater switching on and switching off is performed through the ON/OFF key
At the switching on the message, CLEANING will be shown on first,
Cleaning’ is displayed for 20 second, in order to clean the fire pot.
In the same way at the switching off the message
After the temperature in the stove is lower than 30degree, finally, the phrase
‘GOODBYE’ is displayed.
!! ATTENTION !!
During the flame switching off phase and exchanger cooling, it isn’t
possible to switch on again the heater up to the operation end; this
state is highlighted from the message
‘SWITCHING OFF’
To Next Page
Loading...
