Start Up
12 3A4476E
Refilling FlexLiner
If sprayer runs out of paint simply separate
the cup support from the cup cover/sprayer
and refill the FlexLiner.
1. Remove battery from the sprayer and
open the VacuValve to allow air into the
FlexLiner.
2. Separate the cup support from the
cup
cover/sprayer.
Set the sprayer upside
down on a flat surface. This will keep the
wet paint in the cup cover.
3. Follow steps 2 – 12 in Starting a New
Job, page 9.
ti29742a
To Next Page
Loading...
