Power Cord Replacement
24 312805A
Power Cord Replacement
See Wiring Diagram, page 26.
Removal
1. Remove control board, Control Board Replace-
ment, Removal, page 17.
2. Remove green ground screw (20) and disconnect
green ground wire (G) from frame.
Installation
1. Connect green ground wire (G) to frame with green
ground screw (20). Be sure green ground wire ter-
minal faces up or wires could get caught in shroud.
2. Install control board, Control Board Replacement,
Installation, page 18.
G
20
ti11552a
To Next Page
Loading...
