Kits and Accessories
3A3995L 19
Block Installation Kit
*Torque to 9 to 11 ft.-lbs (12.2 to14.9 N•m)
‡26A479: kit, plate, weld, assistance (see F
IG. 17).
Take the two (2) studs from Block Installation Kit
26A478. Assemble the parts as shown in F
IG. 17. Dis-
card the nuts and plate after the stud welding is com-
plete.
Proximity Switch Kit
Only available for CSP valves with an indicator pin.
Part No. Description Qty
26A478* KIT, weld stud 1
STUD, M6 x 45 2
NUT, M6, lock 2
WASHER 2
26A479‡ KIT, plate 1
PLATE 1
NUT, M6 w/o lock 4
FIG. 17
Part No. Description
26C822 Switch, PNP, 9.5 in. (24 cm) Cable with
M12 connector
26C823 Switch, PNP, 16.5 ft (5 m) Cable with fly-
ing leads
To Next Page
Loading...
