Graco FinishPro HVLP 9.5 - Startup Procedures; Filling the FlexLiner System

Startup
3A4967C 13
Startup
Fill FlexLiner System
1. Disconnect gun from FlexLiner System.
2. Loosen ring from cup. Remove cover
and ring from cup. Verify FlexLiner
remains in cup upon removal of cover
and ring.
3. Fill FlexLiner with material to “MAX FILL”
line. Clean threads and sealing surfaces
of FlexLiner System.
ti30706a
ti30707a
ti30708a