Graco FinishPro HVLP 9.5 - Filling the ProComp Remote Cup

Startup
14 3A4967C
4. Install cover and ring onto cup. Tighten
ring securely.
5. Connect FlexLiner System to gun.
6. Connect air hose to inlet fitting of gun.
7. You are now ready to spray. Reference
Startup, page 16, and HVLP Edge II
gun manual, provided with sprayer, for
spraying instructions.
Fill Remote Cup
(ProComp Models only)
1. Fill remote cup 3/4 full and install cover.
ti30709a
ti30681a
ti30683a
NOTICE
Only hand-tighten remote cup cover.
Excessive tightening may damage cover
gasket.
3/4