Graco HFR - Page 21

Component Identification
3A2797R 21
Key:
CJ Flat Panel Mount
CK Model Number
CL USB Module Interface
CM CAN Cable Connections
CN Module Status LEDs
CP Accessory Cable Connections
CR Token Access Cover
CS Battery Access Cover
ADM Module Status LEDs (CN) Conditions
USB Module Status LEDs (CL) Conditions
FIG. 7: ADM Component Identification - Rear
CR
CK
CJ
CL
CP
CN
CM
CS
r_24E451_3B9900_1a
Module Status LED Signal Description
Green on System is powered up.
Yellow on Communication in progress.
Red solid ADM hardware failure.
Red flashing fast Uploading software.
Red flashing slow Token error. Remove token and upload
software token again.
Module Status LED Signal Description
Green flashing System is powered up.
Yellow on Downloading information to USB
Green/Yellow Flashing ADM is busy, USB cannot transfer
information when in this mode