Appendix B - ADM Setup Screens Overview
54 3A2797R
Appendix B - ADM Setup Screens Overview
The ADM will start in the Run screens at the “Home”
screen. From the Run screens, press to access
the Setup screens. If the Setup screens password is
turned on, use the ADM keypad to enter the password
then press .
From the Setup screens, press to access the Run
screens. For Run screens information, see Technical
Data on page 97. F
IG. 28 shows the flow of the Setup
screens.
FIG. 28: Setup Screens Navigation Diagram
Maintenance
Home Status Events #1
Events #2
Events #...
Errors #1
Errors #2
Errors #...
* Gateway screen will automatically be enabled when a CGM is installed on the system
To Next Page
Loading...
