Graco HFR - Typical Installation

Component Identification
3A2797R 23
Fluid Control Module (FCM)
Key:
A Fluid Control Module
BBase
C Module Connection Screws
D Access Cover
E Module Status LEDs
F CAN Connectors
Diagnostic Information
FIG. 9: Fluid Control Module (FCM)
ti12337a1
ti12336a1
A
E
B
C
D
F
Module Status LED (Ref E) Signal Diagnosis
Green on System is powered up
Yellow Internal communication in progress
Red solid FCM hardware failure. Replace FCM.
Red flashing fast Uploading software.
Red flashing slow Token error. Remove token and
upload software token again.