Appendix B - ADM Setup Screens Overview
3A2797R 69
Advanced Screen 6
Tap to High Pressure Recirculation – This feature if
checked (default is NOT checked), will command the
HFR to interpret a footswitch tap as a go to high pres-
sure recirculation mode, but will NOT dispense material
(same as pressing the “ ” key on the main run
screen). This feature only applies to full recirculation
systems (S-Head, S-Head with Prox., and L-Head dis-
pense valve options), and is disabled if the system is
NOT a full recirculation system.
Other items on this screen do not pertain to full recircu-
lation systems and are therefore disabled.
To Next Page
Loading...
