Graco Husky 2200 Operating Instructions

Operation
Husky™ 2200 Air-Operated
Diaphragm Pump
3A2578C
EN
Polypropylene and PVDF pumps for fluid transfer applications, including high viscosity materials. For
professional use only.
Not for use in European explosive atmosphere locations.
Important Safety Instructions
Read all warnings and instructions in this manual and in your
Repair/Parts manual.
Save these instructions.
Maxim um Working Pressure: 125 psi
(0.86 MPa, 8.6 bar)
PROVEN QUALITY. LEADING TECHNOLOGY.
All manuals and user guides at all-guides.com
all-guides.com

Graco Husky 2200 Specifications

General

Maximum Fluid Pressure	120 psi (8.4 bar)
Maximum Suction Lift	30 ft (9.1 m) wet
Maximum Solid Size	1/4 in (6.3 mm)
Wetted Parts	Polypropylene, Stainless Steel
Max Flow Rate	2200 L/min (581 GPM)
Power Source	Air Operated
Type	Air-operated double diaphragm pump
Fluid Inlet Size	2 in npt(f)
Fluid Outlet Size	2 in npt(f)