EasyManuals Logo

Graco Merkur User Manual

Graco Merkur
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Models
3A7004B 7
EQUIPMENT MISUSE HAZARD
Misuse can cause death or serious injury.
Do not operate the unit when fatigued or under the influence of drugs or alcohol.
Do not exceed the maximum working pressure or temperature rating of the lowest rated system
component. See Technical Specifications in all equipment manuals.
Use fluids and solvents that are compatible with equipment wetted parts. See Technical
Specifications in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For
complete information about your material, request Safety Data Sheets (SDSs) from distributor or
retailer.
Turn off all equipment and follow the Pressure Relief Procedure when equipment is not in use.
Check equipment daily. Repair or replace worn or damaged parts immediately with genuine
manufacturer’s replacement parts only.
Do not alter or modify equipment. Alterations or modifications may void agency approvals and create
safety hazards.
Make sure all equipment is rated and approved for the environment in which you are using it.
Use equipment only for its intended purpose. Call your distributor for information.
Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.
Do not kink or over bend hoses or use hoses to pull equipment.
Keep children and animals away from work area.
Comply with all applicable safety regulations.
MOVING PARTS HAZARD
Moving parts can pinch, cut or amputate fingers and other body parts.
Keep clear of moving parts.
Do not operate equipment with protective guards or covers removed.
Equipment can start without warning. Before checking, moving, or servicing equipment, follow the
Pressure Relief Procedure and disconnect all power sources.
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or
swallowed.
Read Safety Data Sheets (SDSs) to know the specific hazards of the fluids you are using.
Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.
WARNING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco Merkur and is the answer not in the manual?

Graco Merkur Specifications

General IconGeneral
Fluid DeliveryUp to 4.0 gpm (15.1 lpm)
Air Inlet Size1/4 in npsm
Fluid Inlet Size1/2 in npsm
Fluid Outlet Size1/4 in npsm
Maximum Air Input Pressure100 psi (0.7 mpa)
Maximum Fluid Pressureup to 3300 psi (22.7 mpa)
Pump TypeAir-Operated Piston Pump
Flow Rateup to 4.0 gpm (15.1 lpm)
PowerAir operated
Inlet/Outlet SizeFluid Inlet: 1/2 in npsm, Fluid Outlet: 1/4 in npsm

Related product manuals