Graco PR70 Kit Instructions

3A3229B
EN
Kit Instructions
PR70
™
Solenoid Valve
Upgrade Kit
For replacing the air cylinder solenoid valve on all PR70 fixed or variable ratio systems
that meter, mix, and dispense two-component materials. For professional use only.
Part No. 17J520
100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure
Important Safety Instructions
Read all warnings and instructions in this manual
and in PR70
™
and PR70v
™
with Advanced Display
Module Operation and Maintenance Manual
312759. Save all instructions.

Graco PR70 Specifications

General

Hose Length	Customizable
Power Source	Electric
Ratio Range	1:1 to 12:1
Viscosity Range	Up to 1, 000, 000 cps
Materials	Epoxies, polyurethanes, silicones, and other two-component materials
Applications	Potting, encapsulation, gasketing, sealing, bonding
Dispensing Capacity	Variable, based on configuration
Weight	Approximately 150 lbs
Dimensions	Varies based on configuration