To Next PageTo Next Page
Need help?Do you have a question about the Graco E-Flo iQ and is the answer not in the manual?
Read all warnings and instructions before using equipment. Save all instructions.
Details risks of high voltage and high-pressure fluid injection, with necessary precautions.
Warns about pinch/cut hazards from moving parts and ignition risks from fumes.
Covers risks of misuse, exceeding ratings, and adherence to safety regulations.
Warns about hot/toxic fluid contact, fumes, and heated surfaces requiring caution.
Recommends protective gear for eye, hearing, respiratory, and skin protection.
Explains how to configure system type (Ram/Tandem) and basic pump settings.
Details setting zone types, temperatures, and enabling zones for heating.
Configuration of temperature offsets, idle timeouts, drum size, and initial advanced settings.
Step-by-step instructions for flushing the pump with a compatible solvent.
Instructions for preparing the pump and loading material into the platen and valve.
Steps for loading the pump, platen valve, and hose with dispensing material.
Description of the Ram Run screen interface, including pressure, flow, and status indicators.
Description of the Tandem Run screen interface for both pumps.
Details Local/Remote control modes and pump status indicators.
Covers manual pump operation and procedures for drum/valve depressurization.
Explains how to view error lists, use error codes, and troubleshoot specific issues.
General
